Post Construction Pest Control Service

We provide both Pre Construction Pest Control Service and Post Construction Pest Control Service

Pre Construction Pest Control Service include following steps:

We provide both Pre Construction Pest Control Service and Post Construction Pest Control Service

In case of termite infestation in a existing building or to prevent termite infestation Post Construction Anti termite Treatment (Comprehensive Treatment) will be carried out in the following steps:
Chemical barrier along interior wall perimeter (at lowest floor only):

We shall make holes at 1 foot apart along the interior wall perimeter of the building and then inject insecticidal emulsion under pressure into these holes. These holes    filled up with chemically treated cement. This shall prevent the movement of termite along the brick walls into the premises
Chemical barrier along exterior wall Perimeter (at Ground floor only):

We shall make holes at 1 foot apart along the exterior wall perimeter of the building and inject insecticidal emulsion under pressure. This shall prevent horizontal cross over of termites into the building.
Treatment of wooden door and window frames (fixed with Brick wall only):

All wooden door and window frames will be thoroughly treated by making holes all Around the frames and at the junction point of the wall and frames and then inject Insecticidal emulsion under pressure. The holes will be then filled up with white cement.
Treatment of wooden panels

We shall make holes of 2mm diameter along the top, middle and bottom (3Tier) of wooden panel fixed with wall surface. Chemical emulsion will be injected through these holes to kill the live infestation and to prevent future damage. Holes made by us will be filled up with white cement
Treatment of wooden partitions

We shall make holes of 2mm diameter along the top, middle and bottom (3Tier) of wooden Partitions fixed with wall surface. Chemical emulsion will be injected through these holes to kill the live infestation and to prevent future damage. Holes made by us will be filled up with white cement.
Treatment of wooden built in cupboards (fixed with Brick wall only):

We will make holes on the top at the back of the fixed wooden cabinets. Holes will also be made all along the wooden frames and at the junction of the wall and the frames. The chemical emulsion will be injected into these holes to stop termite infestation. The holes made by us will be filled up with color mixed white cement.
Fumigation termite outlets:

We shall fumigate all existing termite outlets and infested conduit points with the help of a fumigant. This will result in the instant killing of the live insect
Treatment of false ceiling:

We shall spray inside the False Ceiling Area with openings provided by removal of electrical points by your electrician. Whole False Ceiling area will be sprayed with oil based chemical emulsion. This will result in the instant killing of the live insects in this area.
Blanket Spray of insecticide – cum wood preservative:

After executing all the steps mentioned above, we will spray all the wooden fixtures with insecticide-cum-wood preservative. We shall be using ISI marked Biflex-TC, Termax, Magik-Tc. In emulsion for this treatment.

Fully prepared & certified:

  • Professionally trained expert
  • Passed courses for safe use of rodent and insect control products
  • Following all health & safety regulations

Against all infestations:

  • Quick to recognise the infestation signs and determine the pest species
  • Evaluating the problem to find the quickest pest control solution
  • Applying the latest effective methods for proofing and prevention

Our Clients